Retrofit Ballast Product Range
The INLINE T5 Series
These E-matic units are designed to give trouble-free retrofit of high efficiency T5 linear fluorescent tubes into existing standard T8 and T12 fixtures.
The INLINE T8 Series
These E-matic units are designed to make possible the retrofitting of shorter high efficiency T8 fluorescent tube lamps into existing 8 feet T12 fixtures.
Roll over the images to view a larger image.
| E-Matic Product Code |
Existing Fitting T8 or T12 switch start fitting. |
Existing Power Consumed by tube & electromagnetic ballast. |
Converts Fitting Using a T5 high efficiency tube with Inline T5 series and its operating power. |
|---|---|---|---|
  |
4ft T8 (1200mm) | 36W tube and ballast = 46W | Inline T5 28W tube and ballast = 30.0W |
| 4ft T12 (1200mm) | 40W tube and ballast = 49W | Inline T5 28W tube and ballast = 30.0W | |
| 5ft T8 (1500mm) | 58W tube and ballast = 72W | Inline T5 35W tube and ballast = 39.0W | |
| 5ft T12 (1500mm) | 65W tube and ballast = 78W | Inline T5 35W tube and ballast = 39.0W | |
  |
6ft T8 (1800mm) | 70W tube and ballast = 84W | Inline T5 49W tube and ballast = 53.0W |
| 6ft T12 (1800mm) | 75W tube and ballast = 95W | Inline T5 49W tube and ballast = 53.0W | |
  |
8ft T12 (2400mm) | 85W tube and ballast = 110W | Inline T5 70W tube and ballast = 77.0W |
| 8ft T12 (2400mm) | 100W tube and ballast = 135W | Inline T5 70W tube and ballast = 77.0W | |
| 8ft T12 (2400mm) | 125W tube and ballast = 175W | Inline T5 70W tube and ballast = 77.0W | |
  |
2ft T8 (590mm) | 18W tube and ballast = 27W | Inline T5 14W tube and ballast = 16.5W |
| 2ft T12 (590mm) | 20W tube and ballast = 30W | Inline T5 14W tube and ballast = 16.5W | |
| 3ft T8 (900mm) | 30W tube and ballast = 41W | Inline T5 21W tube and ballast = 23.5W | |
  |
2ft T8 (590mm) | 18W tube and ballast = 23W | Inline T5 14W tube and ballast = 16.5W |
| 2ft T12 (590mm) | 20W tube and ballast = 30W | Inline T5 14W tube and ballast = 16.5W | |
| 2ft T8 (590mm) | 18W tube and ballast = 21W | Inline T5 14W tube and ballast = 16.5W | |
| 2ft T12 (590mm) | 20W tube and ballast = 23W | Inline T5 14W tube and ballast = 16.5W |
Please Note:
The E-matic retrofit ballast can also be used with existing starter-less and high frequency fittings. For further information on the wiring requirements for this product range into starter-less or high frequency fittings, please contact Challenger Security on: 01253 791888.
