Linear Convertors Benefits & Features
Using the latest technology to optimise energy reduction
For areas where optimum energy saving is the major requirement, the Ematic range of linear convertors is now available.
They offer increased energy saving by use where the existing T8 or T12 Fluorescent Tubes are installed in Electromagnetic luminaries.
They can now be replaced with the Ematic linear convertors without any changes to wiring, simply by removing the starter unit and tube then by installing in to the existing fitting the Ematic Linear convertor which will come with a High Frequency T5 Tube.
Because of the size difference of the T5 and T8 Tubes and also the type of switch gear required to run a high frequency Tube, it is necessary to for the Tube to be mounted in the adaptor.
The technology inside the Ematic Linear Convertor, together with the T5 tube, can create energy savings of over 50% Another benefit that is worth noting, since the adapter operates on a much High Frequency there is no annoying flickering on start up.
Installation of the adapters into the existing in either T8 or T12 fixtures requires no special technical knowledge and is completed in minutes.
- Excellent energy saving: High frequency new generation T5 fitting tubes can offer savings of over 50%
- Short term payback period: This is achieved by initial low cost outlay combined with high reduction in energy consumption.
- Increased tube life: High frequency ballasts combined with new generation T5 tubes offers 20,000 hrs average service life, twice that of standard luminaires fitted with conventional tubes.
- Simple installation: Simple 1 piece design allows for quickness of installation and no extra components needed in starter socket.
- Suitability: The linear adaptor will convert both existing T12 and T8 fittings to efficient high frequency T5.
- Innovative design: The new stylish slim line design with inbuilt light reflector improves light distribution and gives enhanced light output off the fitting.
