PMCSF Ceiling Mount Flush Occupancy Sensor
- 360 degree detection angle
- 5m detection radius at 2.2m mounting height
- Time & lux adjustment
- 3 wire connection: live, neutral and switch live
- IP20
Introduction
The PMCSF 360 degree flush mount motion sensor uses a passive infrared sensor which reacts to changes in temperature emitted by the motion of persons or objects passing through its detecting area.
When you enter the room, it turns on automatically the light to which it is connected and the light remains lit as long as the sensor detects any activity in the detection area. It however will automatically turn off the light after the preset turn-off time has expired.
During the day, the built-in photocell sensor saves electricity by deactivating the light.
With this wall switch installed, you remove the problem of searching in a dark hallway or staircase for a light switch, thus avoiding danger for the elderly, infirm and children at night or in dark areas.
Choosing a Mounting Location
- Avoid aiming the motion sensor at pools, heating vents, air conditioners or objects which may change temperature rapidly.
- Prior to mounting the light fixture, remember to position the motion sensor so that a moving object cuts across its beams, not directly towards them.
Installation
The unit has a sensing angle of 360° and can detect up to 5 meters radius at the mounting height of 2.2 meters or 7 meters radius at the mounting height of 5 meters.
For full details, safety precautions, wiring instructions and troubleshooting view the product PDF. [View Now]