PMCSS Ceiling Mount Flush Occupancy Sensor c/w Remote Control
- 360 degree detection angle
- 6m detection radius at 2.2m mounting height
- Time & lux adjustment
- Switch rating of 2000W incandescent or 600W fluorescent
- Additional switching channel for Hvac control
- 3 wire connection: live, neutral and switch live
Introduction
The PMCSS Micro Motion Sensor is a fully automatic indoor controller capable of controlling up to 2000W lighting load / house appliances or 600W fluorescent lighting.
Not only is it a lighting controller, but also has the capability of detecting slight motion within a radius of 3m around the sensor. It will keep the connected lighting fixture continuously on even when you are on the phone with slight motion being detected.
It also incorporates lux memory feature which means the sensor is able to record and memorize the lux level when the internal connected lighting fixture is turned on by the Micro Motion Sensor. However, once the natural light lux level is higher than that of the internal artificial light even if the movement still exists, the sensor will switch off the internal lighting fixture thus saving the energy.
Simply taking full advantage of its versatile application, you will enjoy the convenience of its thoughtful design.
Choosing a Mounting Location
- Avoid aiming the motion sensor at pools, heating vents, air conditioners or objects which may change temperature rapidly.
- Prior to mounting the light fixture, remember to position the motion sensor so that a moving object cuts across its beams, not directly towards them.
Installation
Install a wall switch adjacent to the power source. This helps you isolate the power with ease.
For full details, safety precautions, wiring instructions and troubleshooting view the product PDF. [View Now]