PMWS2W Wall Mount Occupancy Sensor

  • 110 degree detection angle
  • 10m detection range at 1.8, mounting height
  • Time & lux adjustment
  • Switch rating of 2000W incandescent or 600W fluorescent
  • 2 wire connection: live and switch live
  • IP44

<< Return to product range

Introduction

The PMWS 110 degrees Surface Mount PIR Wall Switch is a fully automatic indoor controller capable of controlling up to 2000W incandescent or 600W fluorescent lighting.

It uses a passive infrared sensor which reacts to changes in temperature emitted by the motion of persons or objects passing through its detecting area. When you enter the room, it turns on automatically the light to which it is connected and the light remains lit as long as the wall switch senses any activity in the detection area. It however will automatically turn off the light after the preset turn-off time has expired. During the day, the built-in photocell sensor saves electricity by deactivating the light.

The PMWS is a very handy device, which offers you safety, security, convenience and energy saving.

It is also easy to install and is suitable for the following places: living room, family room, stairways, entrance hall etc.

With this wall switch installed, you remove the problem of searching in a dark hallway or staircase for a light switch, thus avoiding danger for the elderly, infirm and children at night or in dark areas.

Choosing a Mounting Location

  • For the best results, fix your sensor on a solid surface, 1.2~1.5m above the ground.
  • Avoid aiming the motion sensor at pools, heating vents, air conditioners or objects which may change temperature rapidly.
  • Do not allow sunlight to fall directly on the front of unit.
  • Try to avoid pointing the unit where the motion of pets may be detected.
  • Prior to mounting, remember to position the motion sensor so that a moving object cuts across its beams, not directly towards them.

Installation

The unit has a sensing angle of approx. 110° and can detect up to 12 meters at the mounting height of 1.5 meter or 6 meters at the mounting height of 1.2 meters.

PDF download  For full details, safety precautions, wiring instructions and troubleshooting view the product PDF. [View Now]

Product Range

Occupancy Detectors

Retrofit Ballast

Linear Converters

Distributed by
Challenger Security
Products
2-4 Arkwright Court,
Fylde Ind. Est
Blackpool, Lancs.
FY4 5DR
www.challenger.co.uk

E-matic - Your partner in a greener, brighter future